Safety Data Sheets (SDSs) are summary documents that provide information about the hazards of a product and advice about safety precautions. SDSs are usually written by the manufacturer or supplier of the product. In some circumstances, an employer may be required to prepare an SDS (e.g., when the product is produced and used exclusively in. SDS Drop for Mac is a better way to get samples into your Rytm. Drag & Drop your samples directly to the pads, and that’s it. It’s twice as fast as c6. Trade name: Lemon-Drop (Contd. Of page 1) 2.2 Label elements Labelling according to Regulation (EC) No 1272/2008 The product is additionally classified and labelled according to the Globally Harmonized System within the United States (GHS). The product is classified and labelled according to the CLP regulation. Hazard pictograms GHS05.
Safety Data Sheets (formerly called Material Safety Data Sheets) communicate hazard information about chemical products.
The federal Hazard Communication Standard, revised in 2012, now requires chemical manufacturers, distributors, and importers to provide new Safety Data Sheets in a uniform format that includes the section numbers, headings, and associated information below.
Section 1 – Identification identifies the chemical on the SDS as well as the recommended uses. It also provides the essential contact information of the supplier.
Section 2 – Hazard(s) identification includes the hazards of the chemical and the appropriate warning information associated with those hazards.
Section 3 – Composition/information on ingredients identifies the ingredient(s) contained in the product indicated on the SDS, including impurities and stabilizing additives. This section includes information on substances, mixtures, and all chemicals where a trade secret is claimed.
Section 4 – First-aid measures describes the initial care that should be given by untrained responders to an individual who has been exposed to the chemical.
Section 5 – Fire-fighting measures lists recommendations for fighting a fire caused by the chemical, including suitable extinguishing techniques, equipment, and chemical hazards from fire.
Section 6 – Accidental release measures provides recommendations on the appropriate response to spills, leaks, or releases, including containment and cleanup practices to prevent or minimize exposure to people, properties, or the environment. It may also include recommendations distinguishing between responses for large and small spills where the spill volume has a significant impact on the hazard.
Section 7 – Handling and storage provides guidance on the safe handling practices and conditions for safe storage of chemicals, including incompatibilities.
Section 8 – Exposure controls/personal protection indicates the exposure limits, engineering controls, and personal protective equipment (PPE) measures that can be used to minimize worker exposure.
Section 9 – Physical and chemical properties identifies physical and chemical properties associated with the substance or mixture.
Section 10 – Stability and reactivity describes the reactivity hazards of the chemical and the chemical stability information. This section is broken into 3 parts: reactivity, chemical stability, and other.
Section 11 – Toxicological information identifies toxicological and health effects information or indicates that such data are not available. This includes routes of exposure, related symptoms, acute and chronic effects, and numerical measures of toxicity.
Section 12 – Ecological information provides information to evaluate the environmental impact of the chemical(s) if it were released to the environment.
Section 13 – Disposal considerations provides guidance on proper disposal practices, recycling or reclamation of the chemical(s) or its container, and safe handling practices. To minimize exposure, this section should also refer the reader to Section 8 (Exposure Controls/Personal Protection) of the SDS.
Section 14 – Transport information includes guidance on classification information for shipping and transporting of hazardous chemical(s) by road, air, rail, or sea.
Section 15 – Regulatory information identifies the safety, health, and environmental regulations specific for the product that is not indicated anywhere else on the SDS.
Section 16 – Other information indicates when the SDS was prepared or when the last known revision was made. The SDS may also state where the changes have been made to the previous version. You may wish to contact the supplier for an explanation of the changes. Other useful information also may be included here.
Labs: Contact an EH&S Research Assistance Program specialist.
Shops and studios: Contact an EH&S General Safety specialist.
The Global Harmonization System (GHS) is a product of the United Nations that embodies an international approach to hazard communication using an agreed upon criteria for classifying hazardous chemicals and a standardized method to communicate the hazards through use of container labels and Safety Data Sheets (SDS).
The Occupational Health and Safety Administration (OSHA) within the U.S. Bureau of Labor has adopted most – not all – of the provisions of the GHS within its hazard communication regulations (aka: HazCom Standard). They are found in Title 29 of the Code of Federal Regulations 1910.1200.
Like this article?
No marketing emails!
Appendix D to 29 CFR 1910.1200 indicates the required (and suggested) information to include in the SDS and the format. Sections 1-11 and 16 are required, sections 12-15 may be included but are not required.
If you like this article, please share it using any of the social media platforms identified at the bottom of this article.
You’ll look real smart recommending my articles!